No idea whether it's a problem with the CPU, BIOS/UEFI version, Chipset or whatever, but it seems it just doesn't like older machines as much as newer ones. The drive does not work on a 3rd Gen i5, but it worked fine on a 6th gen i5. Gigabyte Z97X Gaming 3 (LGA 1150) -MSI Tomahawk X299 (LGA 2066) -Change SATA cables (All SATA 3) I got a Syba PCI-E expansion slot that contains 4 SATA ports. I couldn't find the max capacity for my motherboard's SATA ports. It seems to have been some BIOS/CPU compatibility issue. I'm sure the motherboard handles 8TB because other 8TB are recognized. The other possible solution is the mentioned USB adapter, this would likely work, as you could just connect the USB after boot, in case the boot process still got blocked when using the adapter. You could try searching if the HDD model you got have this 3.3v issue, if it does try blocking the pin to see if it solves the problem, I personally used a piece of non-conductive and heat resistant tape, not sure how it's called.
#Bios dc5800 8tb hdd Pc#
Maybe something weird is happening where the PC freezes because it keeps trying to recognize the drive while the drive gets turned off due to the 3.3v pin? My 8TB WD HDD needed to block the 3.3v pin to work in my PC, but like you mentioned it only wasn't recognized, it didn't block BIOS access or boot. Try plugging in a good known hard drive to the computer and see if it works, if a good known HDD works, then probably your Seagate HDD is. Generally, all the SATA Drives are backwards compatible. it is a Seagate Barracuda 500GB (ST3500413AS). I booted into the BIOS to see if there were any setting I needed to change. The BIOS from Inspiron 530 desktop dont recognise my new HDD.
#Bios dc5800 8tb hdd windows#
I was going to replace that with a Western Digital 8TB (new and working) but it is not recognized by either the OS or the Disk Management utility in Windows 10.
I believe this was primarily for 10 TB and up though? However might be worth a check depending on the drive. Ive just bought an AUrora R11 from Dell Outlet which had a 2TB hard drive along with the NVMe boot disk. This should just prevent them from turning on rather than locking things up, but strange things happen sometimes. I want to add a 4TB hard disk drive for data storage only. Also you failed to mention what type of drive this is? Some enterprise drives don't function with the 3.3v line hooked to them.
0 kommentar(er)
